
Seamless Flow, Boundless Energy
Seamless Flow,
Boundless Energy
2205 · 2507 · 2520
Special steel tube, rolled to your specification
- 6–630 mm
- Outside diameter
- 1–50 mm
- Wall thickness
- 20+
- Grades in production
- Annual sales (RMB)
- 2 billion
- Plant area (m²)
- 106,000
- Employees
- 400+
- Cold-rolling mills
- 34
Where the tube goes
Eight industries, one material logic: match the corrosion environment and the temperature, then set the wall thickness.

Electric power
01Supercritical boilers, nuclear steam generators, solar thermal receivers and FGD scrubbers — the four places where the grade decision is made by temperature, not price.
Details
- Typical parts
- Superheater / reheater, water wall, economiser, condenser U-tube, reactor internals, nuclear-grade instrument tube
- Common grades
- Super304H / HR3C · Inconel 690 · 317L · 2205 · Incoloy 800H

Natural gas & LNG
02LNG moves at −196 °C and town gas at 15 MPa; the same pipe family has to hold both, which is why impact testing at cryogenic temperature is written into the contract.
Details
- Typical parts
- LNG transfer line, gathering line, town-gas main, indoor gas piping
- Common grades
- S31603 · 30408 · 316L · S32205 duplex

Oil refining
03High-temperature hydrogen service and sour crude are two different problems; the heat-affected zone of a weld often decides the tube's life before the base metal does.
Details
- Typical parts
- Furnace tube, heat exchanger, hydrogenation air cooler, transfer line
- Common grades
- 321 · 347H · 316L · 2205 · 904L

Chemical & fine chemical
04Chlorides, acids and cyclic cleaning: the corrosion table narrows the choice to a handful of grades, and the cleaning regime usually narrows it further.
Details
- Typical parts
- Reactor coil, heat exchanger, process piping, sampling line
- Common grades
- 304L · 316L · 904L · 2205 · 2507 · N06625

Desalination & water treatment
05Seawater at 70 °C is the classic duplex application; the membrane housing and the brine line are usually where 316L stops being enough.
Details
- Typical parts
- Seawater intake, evaporator tube, brine line, membrane housing
- Common grades
- 2205 · 2507 · 316L · 904L

Marine engineering & shipbuilding
06Classification-society approvals decide whether the tube can be installed at all; the material decision comes after the paperwork decision.
Details
- Typical parts
- Seawater piping, hydraulic line, deck service pipe, cargo piping
- Common grades
- 316L · 2205 · 2507 · 6Mo super-austenitic

Instrumentation
07Small OD, tight tolerance, clean bore: instrument tube is bought on concentricity and surface, not on tonnage.
Details
- Typical parts
- Impulse line, sample probe, analyser tubing, 1/8"–1" OD
- Common grades
- 316L · 304L · precision tube

Heat exchangers
08U-bent, finned or straight: the tube-to-tubesheet joint is the failure point, and the tube's tolerance band is what makes that joint repeatable.
Details
- Typical parts
- U-tube, finned tube, straight tube, condenser and cooler bundles
- Common grades
- 304/304L · 316L · 321 · 2205 · 2520
Product Range
Three bases, one chain
Piercing in Fujian, rolling and finishing in Pingyang, testing in the CNAS-level laboratory.

34cold-rolling mills · 60+ major machines
Pingyang HQ — rolling and finishing
Cold drawing, straightening and solution annealing run from one ERP+MES centre, with the 630 mill and solution-furnace waste-heat recovery.

100,000t of billet a year
Fujian Jinhong — piercing base
630, 150 and 50 piercing mills with full-process digital control.

CNASlaboratory
Testing centre — CNAS level
Universal testing machine, hydrostatic tester, ultrasonic and eddy-current detectors.
Live video audit
Book a 1-on-1 live HD video audit of the Pingyang production lines via Zoom, MS Teams or WhatsApp.
Manufacturing
Factory-direct production and testing
Piercing runs at the Jinhong base in Fujian; rolling and finishing in Pingyang, Wenzhou; testing in our own CNAS-level laboratory. Nothing is outsourced between billet and packed tube.
- 34 cold-rolling mills, 7 cold-drawing lines, 14 straightening lines under one ERP+MES centre
- Every lot sampled and released before packing, EN 10204 3.1 with each shipment
- Grades from 304 to 2507 and nickel alloys, OD 6–630 mm
- Video audit of the production line available on request

Pingyang headquarters plant, Wenzhou

Jinhong piercing base, Fujian

Tensile testing, in-house lab

Tube bundles before shipment
Certifications & Compliance
Four certificates carry most of the weight for export buyers; the rest are listed below with what each one covers.
Primary — what a buyer asks for first
Additional — systems and product approvals
NCS Product Certification — Duplex Tube
GB/T 21833 duplex tube product certification
ISO 14001:2015 — Environmental Management
Environmental management
ISO 45001:2018 — Occupational Health & Safety
Occupational health and safety
ISO 50001:2018 — Energy Management
Energy management
Zhejiang Made Certification (ZJM)
Regional manufacturing standard
Drinking-Water Product Hygiene Licence
Potable water service
Marks on file

Corporate credentials: High-tech enterprise (Zhejiang) · Customs AEO advanced certified · Special equipment manufacturing licence (pressure piping) · Business licence · 24 intellectual property rights
Service and support
One front office for export customers: Shanghai handles the commercial side; Pingyang handles engineering, quality documents and dispatch.
- 24 h
- first reply, business days
- 72 h
- technical proposal
- 3
- working languages
- 100%
- lots with EN 10204 3.1 MTC
- 01
General enquiry
Acknowledged within one business day and routed to the responsible sales engineer.
- 02
Documents and standards
MTC, drawings or the governing standard shared within two business days.
- 03
Quality claim
Acknowledged within 24 hours; containment and a root-cause plan agreed with the customer's QA team.
- 04
Improvement suggestion
Reviewed by sales and QA together; the outcome is reported back within one week.
Pre-sales, in-sales and after-sales support is handled in English, Chinese and Spanish by the Shanghai international marketing centre, with the Pingyang technical and QA teams behind it.
Frequently Asked Questions
What is your MOQ for stainless steel seamless pipe?
Minimum order quantity is set per size and grade so that the heat stays economical. Tell us your target quantity and specification, and we confirm the exact minimum for your size within one working day. Trial orders are negotiable for first cooperation.
Do you supply EN 10204 3.1 material certificates?
Yes. Every lot ships with an EN 10204 3.1 inspection certificate stating heat number, grade, chemical composition, mechanical properties and test results. 3.2 certificates witnessed by a third-party inspector are available on request.
Which standards can you produce stainless steel pipe to?
ASTM A312 / A213 / A269 / A270, GB/T 14976, GB/T 13296 and the GB/T 17395-2024 dimensional tolerances. Our engineers took part in drafting GB/T 17395-2024, so customer standards and agreed inspection plans are also workable.
What is the lead time for 316L seamless pipe?
Standard sizes from stock ship in 3–7 days. Mill production is typically 15–25 days after deposit, depending on size, grade and quantity. Large-diameter welded pipe and U-bent heat exchanger tube run 25–35 days.
Can you supply duplex 2507 and heat-resistant 2520 tube?
Yes. 2507 super-duplex tube for deep-sea line pipe and 2520 heat-resistant / nickel-alloy tube are two of our specialities, and 2205 and 904L are also available. These grades are made to order and quoted by size and quantity.
How is the pipe tested before shipment?
Hydrostatic, eddy-current and ultrasonic testing where specified, plus dimensional check, PMI, hardness and — depending on the standard — flattening or intergranular corrosion testing. Test reports travel with the goods.


















